The Best Fit for Contractors
The NEW MAGNATRAC® MH8000 (shown on the left in the picture) utilizes the same (TCP™) Tandem Chain Path system that has made Struck an industry leader in the compact equipment world. Standard MH8000 items include a 31 hp engine, (35 hp engine available), a time tested hydraulic drive system, power cooled hydraulics, multi stage air cleaner, dual halogen headlights, 5+ gallon fuel tank, 40,000 ultimate tensile strength per track and a robot welded “2 ton pull” undercarriage and track system. Dual pump hydraulics pump out over 23 GPM at 3,000 PSI giving you added versatility to operate higher flow hydraulics, farm implements and rent skid steer attachments.
Options include loaders with an optional quick hitch system which utilize third party skid steer and farm tractor implements. Such as: snow blowers, concrete mixers, grapples, mowers, chippers, sweepers and many more. A variety of backhoe sizes are offered as well as a 6-way dozer blade with a standard 540 RPM PTO using a 1 3/8 diameter, six splined shaft, as well as other category 1 three point hitch attachments as well.
Vanguard is the innovator and proven leader for BIG BLOCK™engine power, performance and reliability. For the most challenging applications — where downtime is not an option — this BIG BLOCK™engine has been expertly engineered to deliver the dependability hardworking people need to get a lot more done throughout the day. 31 hp standard engine with 35 hp engine upgrade available for maximum work power!
This consistent and precise, trademarked track design, has 7x greater sprocket support compared to a single sprocket design! 5 heavy duty track rollers per side made from amazingly hard AR400 plate steel evenly distribute weight and ensure good ground contact. Raised fenders allow for massive debris clearance in the track system and lockable collars allow for greater wear of track roller axles.
No clutches or shifting gears with a MAGNATRAC®! Hydraulic controls move with finger-tip ease to nimbly maneuver the tractor exactly where you want it. Because you can rotate the tracks in opposite directions at the same time, the MH8000 turns 360 degrees in it’s own length. The MH8000 turns in just over 6 ft! A comparably powered compact tractor requires more than twice the space – over 13 ft. of clear space to turn around. Gauges are easy to read and with standard hand throttle and foot throttle (not shown), your engine rpm is easily adjusted.
EPA, CARB approved, 5+ gallon, easy to fill fuel tank assures long hours of uninterrupted earthmoving. Includes carbon filter, fuel gauge and easy fuel shutoff. Standard hydraulic circuit system allows for easy connection of optional pto or third party skid steer implements.
Two powerful halogen headlights make sure your work or fun doesn’t stop just because the sun goes down! Extends your viewing distance with 12V, 55 Watt H3 halogen bulbs. The simulated H.I.D. white beam provides a super bright light that enhances visibility. 4 heavy duty hood straps allow for easy access to the engine and hood grab bar allows for a helpful hand when getting on and off your equipment.
Deluxe operator’s seat with easy to use pin height adjustment allows for quick and easy operation of all attachments. Loader or blade controls are at an easy reach, drive controls are right at your fingertips. Dual 8″ diameter brakes are within easy reach of your feet and battery is easily removed for maintenance.
The large 190 sq in external oil cooler boosts cooling capacity with a huge 16″ 1550 CFM fan to keep your hydraulic oil running cool all day long. Protective fuel tank cover with circular punch out for easy access to fuel shut off, ensures your fuel tank stays safe from debris. Long reach engine oil drain hose ensures easy maintenance when it’s time to change that engine oil.
|Make||Vanguard, V-Twin Big Block|
|Starting Type||Electric, at seat|
|Engine Type||Air-cooled, V-Twin OHV|
|Number of Cylinders||2 (Cast-Iron Sleeved)|
|Carb & EPA Certified||Yes|
|Air Filter||5″ Centrifugal Multi-Stage Air Cleaner|
|Alternator||20 AMP @ 3600 RPM|
|Low Oil Alert||No|
|Oil Capacity||2.3 US qt (2.18L)|
|Oil Type||SAE 10W-30|
|Cooling Methods||Air Cooled|
|Track Drive Pump||1.01 cubic inch displacement, 15.7 GPM @3600 RPM|
|Attachment Pump||.500 cubic inch displacement, 7.8 GPM @ 3600 RPM|
|Attachment Valve||5 section, (2 float, 3 standard)|
|Track Motors||10.6 cubic inch displacement, rated @ over 3500 PSI (2)|
|Primary Drive Chain||60R, 9,200 lb tensile strength|
|Final Drive Chain||80HK, 22,046 lb tensile strength|
|Chain Sprockets||Induction hardened steel|
|Drawbar Pull||3,000 lbs.|
|Type||TCP – Tandem Chain Path (Dual chains each track)|
|Ground Contact||5.36 sq. ft.|
|Chain Type||CA551X – 40,000 tensile strength|
|Number of Track Pads||72 total, 36 per side|
|Tensioning Type||Industrial grade coiled steel springs (4)|
|Pad Thickness||1/4″ thick steel|
|Pad Size||3” wide x 9 1/2” long|
|Shoe Types||Optional: Non-Marking UHMW Shoe, Steel grouser shoe|
|Track Sprockets||AR200 pre-hardened steel, plasma cut|
|Track Rollers||4 1/2″ diameter, 5/8″ thick flanges, solid steel (5 per side)|
|Fuel Type||Unleaded 87 octane or higher|
|Fuel Capacity||5+ U.S. gallons, (6.1 liters)|
|Inline Fuel Filter||Yes|
|Fuel Shutoff Value||Yes|
|Dimensions & Weights|
|Lower Frame Ground Clearance||Front: 6.75″, Rear: 5.25″|
|Upper Frame Ground Clearance||9.5″|
|Length||62.5″ (With no attachments)|
|Height||51″ (With no ROPS)|
|ROPS Height||80 3/4″ (Includes grouser shoes)|
|Weight||2,100 lbs (With no attachments)|
|Speed||Low Range: 2.4 mph / High Range: 3.5 mph|
|Frame||Lower: Robot welded, 1/4″ plate steel, 2″ bars / Upper: Robot welded, 1/4″ plate steel & 7GA ,|
|Axle Size||1 3/16” diameter on track Sprockets, 7/8″ diameter on idlers|
|As Shipped||Assembled, painted (Loader, 6-Way Blade, Backhoe, Rear Hitch & PTO Assembled. Other attachments need assembly)|
|Shipping Dimensions||50″ x 90″ x 56″ High (Extra pallets with backhoe & other attachments, 50″ x 90″ x 88″ high if ROPS & grouser shoes factory installed)|
|Shipping Weight||2,330 lbs. (With attachments will vary)|
|Safety & Misc.|
|Brakes||Dual, 8” Disk Caliper|
|ROPS||Optional, 2 Pt. with overhead bend, Certified|
|Instrumentation||Hour Meter, Hydraulic Oil Temp, Amp Meter|
|Seat||High back, adjustable (Rotatable & height adjustment standard)|
|Hydraulic Oil Cooler||Externally mounted, 16″ engine fan cooled, cooling Core Area 190 sq. in.|
|PTO||Optional, 1 3/8″ dia., 6 splined, 540 RPM, output: 20 hp @ 3,600 RPM|
|Machine Warranty||2 yrs Residential Use, 2 yrs Light Commercial Use|
|Engine Warranty||3 yrs Residential Use, 3 yr Commercial use|
|Battery||12 Volt, 750 CCA, Complimentary basis|
|A.||The possibility is very good, however, there are probably a few different ways to go about the project. The most common way to build terraces would probably be to dig them out with the loader, as our loaders can excavate as well as load. That being said you should be able to do it with the #815 package as well, but keep in mind you'd want to loosen the soil first with the rear ripper if the soil is very hard. This will speed up the application and make your 6 way blade not work so hard.|
|Posted by: Jose|
|A.||The possibility is very good. The loader on the MAGNATRAC MH8000 or the MAGNATRAC MH4900 are not just loaders, they can excavate as well. Building terraces with these machines will work, however, there are probably a few different ways to go about the project. If you'd want a backhoe on the back of the machine to aide in the project, you can add that as well. You could buy a backhoe at a later date as well and add it to the machine.|
|Posted by: Jose|
|A.||On the new MH4900, the ground speed is not higher than the MH8000, however, it has been increased for an entry level hydro model. The biggest difference is in the new hydro-static drive system. This new technology allows for more power to the track system. Previous models had 1,500 PSI going to each track..now there is 3,000 PSI going to each track on the MH4900. You are correct, the MH4900 has a dedicated 10 GPM going to the attachment valve. The PSI is regulated on each section for our specific attachments, but the valve also allows full 10 Gpm flow to the PTO or mini-skid steer connection. On the MH8000 the hydraulic system works a bit different. The HC74 hydraulic circuit allows the track and aux. pumps combine flow to the attachments. Total flow would be 23.5 gpm. When looking for speed hitch attachments, stay in the 10-20 GPM range.|
|Posted by: Wesley|
|A.||Yes, the Struck Corporation offers financing through PayPal credit. If you are looking for longer terms that what is offered under our financing page, we have found that you can get better loan terms by dealing with local loan officers where they have already established a good credit history. We do accept Visa, Master Card, Discover card and PayPal.|
Many other companies make “farm type” implements/skid steer attachments that make the MAGNATRAC® MH8000 even more versatile. Please speak with a Struck Representative to verify specs on specific third party attachments will be compatible with our equipment. (GPM) Gallons Per Minute Ratings and weight specs will vary for each attachment.
Products to fit our SH44 – Speed Hitch Universal Mounting System
Products to fit our RH65 – Category 1 Three Point Rear Hitch
We offer a variety of easy shipping and delivery options within the United States and Canada. From home delivery to terminal delivery and everything in-between, we have you covered.
We ship to thousands of trucking terminals across the USA & Canada. While requesting a quote submit your zip code/postal code and we will find the trucking terminal closest to your location. When picking up at shipping terminal, you will need a trailer to accommodate your machine. The shipping terminal will load your machine into the back of a customer supplied trailer. Some customers hire a local flatbed towing service for larger deliveries to their home.
The business you select must have a semi height loading dock or forklift to unload and accept delivery during normal business hours. You must make arrangements with the business to accept your delivery. Business locations could include: work places, feed stores, lumber yards, building supply centers, etc.
Your home must be accessible by tractor-trailer*, and someone must be home to accept delivery. The truck driver will lower your item to the ground using a forklift attached to the back of a flatbed tractor-trailer. The driver will move the item to the ground with the forklift. The driver can only move the item off the truck, not to a specified location.
All customers outside the US and Canada must find a freight forwarder to handle the shipping, crating, and any other duties, taxes or other fees. The freight forwarders only deliver to a business address. If you do not have a business address they can deliver to the countries closest port and then you can pick up the unit at the port or make other arrangements for the items to be directly delivered to you. Merchandise is payable directly to the Struck Corporation by wire transfer or PayPal. A 30% deposit is required to put an order into our production schedule with the remaining balance due right before we ship.
Rush delivery is not available on freight shipments. We ship best method, depending on the delivery method you choose and your location.
For Home Delivery Services, after we process your order and it leaves our factory, the freight company will call you to schedule a delivery time. The carrier will usually provide a 3-4 hour delivery window (for example, 8 am to noon).
If the package arrives damaged, you must note it on the bill of lading. If your machine arrives damaged, call Struck customer service at 1-877-828-8323 as soon as possible.
You can also pick up your machine at the Struck factory in Cedarburg, WI. When an item is picked up at the factory, we charge a 5.6% sales tax unless you have a tax exempt identification.
*Home delivery is not available in all areas. For delivery to Canada, you must have a freight broker. If you do not have a freight broker that you normally work with, our shipping company does have a broker that you can use. Prices for shipments to Canada do not include any duties, taxes or other fees related to the shipment. Speak with a freight broker for more information. All prices are in US Funds. A driveway is considered accessible to a tractor trailer if it a) has no overhanging trees, b) has no power lines, c) contains no culverts or bridges, and d) will allow the truck to make a full turn-around. If the driveway isn’t accessible the delivery will be made at the base of the driveway.
Parts orders placed by 3 pm CST are shipped the same day by UPS or Priority Mail. Any out of stock items ship within 1 week. All orders are currently by phone, please call 1-877-828-8323 Monday – Friday from 8 am until 5 pm Central Standard Time (CST). Visa, Master Card, Discover, American Express and Pay Pal accepted. In the future an online shopping cart will be offered.