The Best Fit for Homesteaders
Standard MH4900 items include: a Honda GX690 gas engine, a hydro-static drive system driven by commercial grade tandem piston pumps, (the first for any MAGNATRAC®), power cooled hydraulics, 5+ gallon fuel tank, 30,000 ultimate tensile strength per track and a robot welded “2 ton pull” undercarriage and the same time tested (TCP™) Tandem Chain Path system. A dedicated attachment pump pushes out 10 GPM @ 3,000 PSI, giving you added versatility to operate category 1 three point implements and use “mini skid steer rated” attachments, with the universal skid steer mounting plate.
Options include loaders with an optional quick hitch system which utilize third party mini skid steer and farm tractor implements. Such as: snow blowers, concrete mixers, grapples, mowers, chippers, sweepers and many more. A variety of backhoe sizes are offered as well as a 6-way dozer blade with a standard 540 RPM PTO using a 1 3/8 diameter, six splined shaft, as well as other category 1 three point hitch attachments as well. See specs for more details! – Hydraulic auger shown in picture.
Meet the Muscle
Honda, the name synonymous with quality, reliability and value has been the #1 choice for the construction and rental industry for years! The MH4900 powers through tough ground, with a 2 cylinder Honda GX690 air cooled gasoline engine, with 35.6 lb ft of torque. Standard items include: digital CDI ignition, integrated cylinder and head, and a 17 amp alternator. Upgrade your MH4900 with additional items like a hour/tach meter, hydraulic oil temperature gauge, and our all NEW EOL™ easy to ready hydraulic oil level system. Read more below.
The heart and soul of the NEW MH4900 are commercial grade tandem piston pumps. This technology means: less heat, dynamic breaking, variable speeds from a slow creep to 3 mph and MORE POWER! This isolated drive circuit doubles your PSI to each track! Before the tracks had 1,500 PSI, now with the NEW Hydro-Static Drive…they have 3,000 PSI! – That’s a 100% increase!
No clutches or shifting gears with a MAGNATRAC®! Hydraulic controls move with finger-tip ease to nimbly maneuver the tractor exactly where you want it. Because you can rotate the tracks in opposite directions at the same time, the MH4900 turns 360 degrees in it’s own length. The MH4900 turns in just over 6 ft! A comparably powered compact tractor requires more than twice the space – over 13 ft. of clear space to turn around. Gauges are easy to read and with all NEW redesigned Hi / Low hand throttle means your engine RPM is easily adjusted.
EPA, CARB approved, 5+ gallon, easy to fill fuel tank assures long hours of uninterrupted earth-moving. Includes: carbon filter, fuel gauge and easy fuel shutoff. Optional front auxiliary hose kit, comes with flat faced couplers for easy connection of third party mini skid steer implements, using the universal skid steer mount.
Standard-duty, upper frame mounted heat exchanger and engine crankshaft mounted 9″ aluminum fan keeps your hydraulic oil cool all day long! Heat guard allows engine heat to dissipate from the hood and grill area easily.
Homesteader seat with easy to use pin height adjustment allows for quick and easy operation of all attachments. Loader or blade controls are at an easy reach, track drive controls are redesigned and all NEW Hi / Low hand throttle makes setting your speed for moving dirt and engine RPM for backhoe work a snap! From a slow creep to max speed, the MH4900 is easy and safe to use!
Celebrate 50 Years with us by upgrading your MH4900! The 50th anniversary upgrade includes: Struck 50th Anniversary Grill, Hour / Tach Meter, hydraulic oil temperature gauge, and the all NEW EOL™ easy to ready hydraulic oil level system. Is your soil a little rockier and sandier than most? No problem, the MH4900 is offered with a track upgrade as well. This track upgrade (not shown in the featured picture) includes: heavy-duty CA551X track chain, 3/8 thick AR200 pre-hardened steel track sprockets, 2 more track idlers per side and protective idler axle collars.
|Make||Honda GX690, V-Twin|
|Starting Type||Electric, at seat|
|Engine Type||Air-cooled, V-Twin OHV|
|Number of Cylinders||2, Integrated Cylinder and Head|
|Carb & EPA Certified||Yes|
|Air Filter||Dual element|
|Alternator||17 AMP @ 3600 RPM|
|Low Oil Alert||Yes|
|Oil Capacity||2.1 US qt (2.0L)|
|Oil Type||SAE 10W-30|
|Cooling Methods||Air Cooled|
|Track Drive||1.33 cubic inch per rev., Dedicated 19.6 GPM @3600 RPM|
|Attachment Pump||.66 cubic inch per rev., Dedicated 10 GPM @ 3600 RPM|
|Attachment Valve||5 section, (2 float, 3 standard)|
|Track Motors||125cc or 7.67 cubic per rev. (2)|
|Primary Drive Chain||60R, 9,200 lb tensile strength|
|Final Drive Chain||80HK, 22,046 lb tensile strength|
|Chain Sprockets||Induction hardened steel|
|Drawbar Pull||3,000 lbs.|
|Type||TCP – Tandem Chain Path (Dual chains each track)|
|Ground Contact||48″ long x 9 1/2″ wide / 5.36 sq. ft.|
|Chain Type||CA557 – 30,000 tensile strength, (TSU551 Track Upgrade available)|
|Number of Track Pads||72 total, 36 per side|
|Tensioning Type||Industrial grade coiled steel springs (4)|
|Pad Thickness||1/4″ thick steel|
|Pad Size||3” wide x 9 1/2” long|
|Shoe Types||Optional: Non-Marking UHMW Shoe, Steel grouser shoe|
|Track Sprockets||1/4″ AR200 pre-hardened steel, plasma cut, (TSU551 Track Upgrade available)|
|Track Rollers||4 1/2″ diameter, 5/8″ thick flanges, solid steel (3 per side), (TSU551 Track Upgrade available)|
|Fuel Type||Unleaded 86 octane or higher|
|Fuel Capacity||5+ U.S. gallons, (19 liters)|
|Inline Fuel Filter||Yes|
|Fuel Shutoff Value||Yes|
|Dimensions & Weights|
|Lower Frame Ground Clearance||Front: 6.75″, Rear: 5.25″|
|Upper Frame Ground Clearance||9.5″|
|Length||62.5″ (With no attachments)|
|Height||44 1/2″ (With no ROPS)|
|ROPS Height||80 3/4″ (Includes grouser shoes)|
|Weight||1,700 lbs (With no attachments)|
|Speed||Variable Regular Drive: 0-3 mph|
|Frame||Lower: Robot welded, 1/4″ plate steel, 2″ bars / Upper: Robot welded, 1/4″ plate steel & 7GA ,|
|Axle Size||1 3/16” diameter on track Sprockets, 7/8″ diameter on idlers|
|As Shipped||Assembled, painted (Loader, 6-Way Blade, Backhoe, Rear Hitch & PTO Assembled. Other attachments need assembly)|
|Shipping Dimensions||50″ x 90″ x 56″ High (Extra pallets with backhoe & other attachments, 50″ x 90″ x 88″ high if ROPS & grouser shoes factory installed)|
|Shipping Weight||1,930 lbs. (With attachments will vary)|
|Safety & Misc.|
|Brakes||Dual, 8” Disk Caliper|
|ROPS||Optional, 2 Pt. with overhead bend, Certified|
|Instrumentation||Optional, (See UG50 50th Anniversary Upgrade)|
|Seat||Standard-duty, Rotatable & height settings with pin|
|Hydraulic Oil Cooler||Internally mounted, 9″ engine fan cooled, 425 CFM.|
|EAC Attachment Control||Optional, factory installed option only, (See EAC19 Electric Attachment Control Upgrade)|
|PTO||Optional, 1 3/8″ dia., 6 splined, 540 RPM, output: 17 hp @ 3,600 RPM|
|Machine Warranty||2 yrs Residential Use|
|Engine Warranty||3 yrs Residential Use, 3 yr Commercial use|
|Battery||350 CCA, Complimentary basis|
|A.||It depends on the weight of the hay bales. The HL900 Loader that connects to the MH4900 or the MH8500, can lift approx. 2,000 lbs off the ground and then approx. 800 lbs at full lift height of 93" high.|
|Posted by: Shane|
|A.||It's made right here in the USA, at our factory in Cedarburg, WI! - Find out more about us by clicking this link.|
|Posted by: Ron|
|A.||Great question! We actually sell factory direct to you and have no dealers. Please see additional information below regarding shipments to other countries. Deliveries to Other Countries Outside the USA & Canada All customers outside the US and Canada must find a freight forwarder to handle the shipping, crating, and any other duties, taxes or other fees. The freight forwarders only deliver to a business address. If you do not have a business address they can deliver to the countries closest port and then you can pick up the unit at the port or make other arrangements for the items to be directly delivered to you. Merchandise is payable directly to the Struck Corporation by wire transfer or PayPal. A 30% deposit is required to put an order into our production schedule with the remaining balance due right before we ship.|
|Posted by: BOUDEVILLE|
|A.||Yes, we do have "True Dozer Power" built into all of our machines, but please keep in mind our machines are lighter than large full scale dozers, so you will have to take smaller bites. The larger MH series MAGNATRACS offer a true 6-way blade like a real dozer and come with the float action as well, so you can float your blade or bucket when reversing, to level the ground. On the smaller machines, like the RS1000 or the kit dozer, there is a manual angle (left and right motion) available and it does have a replaceable cutting edge than can be angled slightly (tilted), but is not considered a "True 6-way blade".|
|Posted by: Stanley|
|A.||The max lift capacity on the front loader on the MH4900, would be about 2,000 lbs off the ground and about 800 lbs at full height, 93" high.|
|Posted by: Joseph|
|A.||Great question. Yes, I would say it would if you wanted to add some on your own. A 12 volt battery is used in the system along with a 17 amp alternator as well.|
|Posted by: Martin|
|A.||Yes, you can! The loader on the MAGNATRAC MH8500 or the MAGNATRAC MH4900 are not just loaders, they can excavate as well. Building terraces with these machines will work, however, there are probably a few different ways to go about the project. If you'd want a backhoe on the back of the machine to aide in the project, you can add that as well. You could buy a backhoe at a later date as well and add it to the machine.|
|Posted by: Jose|
|A.||On the new MH4900, the ground speed is not higher than the MH8000, however, it has been increased for an entry level hydro model. The biggest difference is in the new hydro-static drive system. This new technology allows for more power to the track system. Previous models had 1,500 PSI going to each track..now there is 3,000 PSI going to each track on the MH4900. You are correct, the MH4900 has a dedicated 10 GPM going to the attachment valve. The PSI is regulated on each section for our specific attachments, but the valve also allows full 10 Gpm flow to the PTO or mini-skid steer connection. On the MH8000 the hydraulic system works a bit different. The HC74 hydraulic circuit allows the track and aux. pumps combine flow to the attachments. Total flow would be 23.5 gpm. When looking for speed hitch attachments, stay in the 10-20 GPM range.|
|Posted by: Wesley|
|A.||A MAGNATRAC or MINI-DOZER has a very low center of gravity and great traction, so in general terms they can do much better than a wheeled tractor. Read more about the benefits of a MAGNATRAC here. As far as a published slope and degree angle, we don't publish anything more than what we feel is safe. The number that we provide is 30% maximum grade-ability.|
|Posted by: K|
|A.||Yes, the Struck Corporation offers financing through Rocket Loans or we do accept PayPal Credit. If you are looking for longer terms that what is offered under our financing page, we have found that you can get better loan terms by dealing with local loan officers where they have already established a good credit history. We do accept Visa, Master Card, Discover card and PayPal Credit.|
Third Party Attachments
Many other companies make “farm type” implements and mini skid steer attachments that make the MAGNATRAC® MH4900 even more versatile. Please speak with a Struck Representative to verify specs on specific third party attachments will be compatible with our equipment. (GPM) Gallons Per Minute Ratings and weight specs will vary for each attachment. The MH4900 outputs 10 GPM @ 3,000 PSI for mini skid steer rated attachments with the standard universal skid steer mounting plate.
Shown in the picture is a hydraulic chipper. Products to fit our SH44 – Speed Hitch Universal Mounting System
3rd party attachment links are shown below. Not all items listed on these websites will work with our machines. Call for additional details.
Shown in the picture is a hydraulic log splitter. Products to fit our RH65 – Category 1 Three Point Rear Hitch
3rd party attachment links are shown below. Not all items listed on these websites will work with our machines. Call for additional details.
We offer a variety of easy shipping and delivery options within the United States and Canada. From home delivery to terminal delivery and everything in-between, we have you covered.
We ship to thousands of trucking terminals across the USA & Canada. While requesting a quote submit your zip code/postal code and we will find the trucking terminal closest to your location. When picking up at shipping terminal, you will need a trailer to accommodate your machine. The shipping terminal will load your machine into the back of a customer supplied trailer. Some customers hire a local flatbed towing service for larger deliveries to their home.
The business you select must have a semi height loading dock or forklift to unload and accept delivery during normal business hours. You must make arrangements with the business to accept your delivery. Business locations could include: work places, feed stores, lumber yards, building supply centers, etc.
Your home must be accessible by tractor-trailer*, and someone must be home to accept delivery. The truck driver will lower your item to the ground using a forklift attached to the back of a flatbed tractor-trailer. The driver will move the item to the ground with the forklift. The driver can only move the item off the truck, not to a specified location.
All customers outside the US and Canada must find a freight forwarder to handle the shipping, crating, and any other duties, taxes or other fees. The freight forwarders only deliver to a business address. If you do not have a business address they can deliver to the countries closest port and then you can pick up the unit at the port or make other arrangements for the items to be directly delivered to you. Merchandise is payable directly to the Struck Corporation by wire transfer or PayPal. A 30% deposit is required to put an order into our production schedule with the remaining balance due right before we ship.
Rush delivery is not available on freight shipments. We ship best method, depending on the delivery method you choose and your location.
For Home Delivery Services, after we process your order and it leaves our factory, the freight company will call you to schedule a delivery time. The carrier will usually provide a 3-4 hour delivery window (for example, 8 am to noon).
If the package arrives damaged, you must note it on the bill of lading. If your machine arrives damaged, call Struck customer service at 1-877-828-8323 as soon as possible.
You can also pick up your machine at the Struck factory in Cedarburg, WI. When an item is picked up at the factory, we charge a 5.6% sales tax unless you have a tax exempt identification.
*Home delivery is not available in all areas. For delivery to Canada, you must have a freight broker. If you do not have a freight broker that you normally work with, our shipping company does have a broker that you can use. Prices for shipments to Canada do not include any duties, taxes or other fees related to the shipment. Speak with a freight broker for more information. All prices are in US Funds. A driveway is considered accessible to a tractor trailer if it a) has no overhanging trees, b) has no power lines, c) contains no culverts or bridges, and d) will allow the truck to make a full turn-around. If the driveway isn’t accessible the delivery will be made at the base of the driveway.
Parts orders placed by 3 pm CST are shipped the same day by UPS or Priority Mail. Any out of stock items ship within 1 week. All orders are currently by phone, please call 1-877-828-8323 Monday – Friday from 8 am until 5 pm Central Standard Time (CST). Visa, Master Card, Discover, American Express and Pay Pal accepted. In the future an online shopping cart will be offered.