The Perfect Match for Farmers, Ranchers & Contractors
The NEW MAGNATRAC® MH8500 is the Swiss Army Knife of Compact Earth-movers! It’s packed full of power, performance & value at every level. From the robot welded lower undercarriage, to the contractor-grade seat, this is…the BEST machine we’ve ever produced! Dollar for dollar, the MH8500 is a GREAT value! No need to spend 50k, 60k or even more, on a less versatile piece of equipment. The MH8500 will do it all, at a fraction of the price! The MH8500 shares many of the same components of its’ predecessors, such as: a similar lower frame, the same time tested & trusted TCP™ Tandem Chain Path system and more! Coupling together these time tested designs, with NEW Hydro-Static technology, means we can out perform all of our previous models and SAVE YOU MONEY!
Options include loaders with an optional quick hitch system which utilize third party universal front attachment compatibility and farm tractor implements. Such as: snow blowers, concrete mixers, grapples, mowers, chippers, sweepers and many more. A variety of backhoe sizes are offered as well as a 6-way dozer blade with a standard 540 RPM PTO using a 1 3/8 diameter, six splined shaft, as well as other category 1 three point hitch attachments as well. See specs for more details! – Shown in the picture is a hydraulic auger.
The MH8500 boasts an industrial 3-cylinder Kubota D1305, (tier 4) liquid cooled diesel engine. Standard items include: glow plug for cold weather starts, 40 AMP alternator for adding additional electrical components, RPM gauge, hydraulic oil temp gauge & a LOFA industrial ignition with hour meter & battery indicator lights. Kubota 05 series engines has been powering heavy-duty equipment for over 30 years! That’s TRUSTED POWER!
The heart of the HYDRO-STATIC drive in the MH8500, are commercial grade tandem piston pumps. Rated @ 19.6 GPM, they provide less heat, dynamic braking, variable speeds & massive power to each track! – 3,000 PSI! — That’s DOUBLE the amount of pressure from previous MH Series MAGNATRAC® models!
This attachment control system, gives you the utmost in professional speed control of your rear attachments, such as backhoes & PTO. With an easy to use “priority flow control dial” you can control your attachment speed with “pin point” professional accuracy. Indicator light allows for easy recognition of ON/OFF control of these attachments.
Nobody likes to stop working before the job is done! Boasting a big 5+ gallon, easy to fill fuel tank, with top mounted fuel gauge, easy release cap with cap connector, and protective steel guard, means uninterrupted earth-moving is easier and better than ever before!
Constant hydraulic flow to the Heavy-Duty heat exchanger rated at 363 CFM and 9” fan, keeps your hydraulic fluid cool all day long! Durable, tough, bright & reliable dual 18W LED headlights, allow you to work late into the evening or even those early mornings!
Jump right in! The loader/blade controls are at an easy reach, track drive controls are ergonomically designed and all NEW Hi / Low hand throttle makes setting your speed for moving dirt and engine RPM for backhoe work a snap! From a slow creep to max speed, the MH8500 is easy and safe to use!
Easy to view hydraulic oil sight window, means no opening up the hood to mess with a hard to read dipstick! – Simple & easy to use! If you see hydraulic oil in the sight window, you’re good to go!
The MH8500 inherited the backbone of its predecessors; an over 300 pound all-steel undercarriage frame, robotically welded in our custom fixture. Exemplifying not only good design, strength, efficiency and consistency, but this also creates a very low center of gravity when it comes to hilly terrain and steep slopes!
The upper frame isn’t just any regular old tractor frame by any means. It’s a rugged, all-steel, almost 200 lb., meticulously robot welded, 13 gallon hydraulic tank, engine mounting area, rear draw-bar and provides mounting points for the loader, backhoe and other hard working attachments!
The technology behind TCP (Tandem Chain Path) is the matched AR200 pre-hardened sprockets of the rear drive and front idler sprockets. Simultaneously engaging both track chains provides redundancy in case of debris interference and the effectiveness of a sprocket width seven times greater. 10 heavy-duty guide rollers (5 per side) cut from 5/8” thick solid steel, encase the heavy-duty CA551X track chain and precisely direct the chain into the drive and idler sprockets. Center roller axles are easily accessed by removing 1 bolt!
|Make||Kubota Diesel, D1305-E4B|
|Starting Type||LOFA Industrial Ignition, Cell starter with Glow Plug, at seat|
|Bore / Stroke / Displacement||(78.0 mm) 3.07 in. / (88.0 mm) 3.46 in. / (1.261 L) 76.95 cu. in|
|Engine Type||Industrial vertical 4-cycle liquid cooled diesel|
|Number of Cylinders||3|
|Carb & EPA Certified||Yes, Tier 4|
|Intake System||Naturally Aspirated|
|Air Filter||Dual elements: Inner & Outer|
|Low Oil Alert||Yes, indicator light on LOFA industrial ignition|
|Oil Capacity||1.51 US gal. (5.7 L)|
|Oil Type||SAE 10W-30 or SAE 15W-40 (Good for 14° F to 77° F, but varies on ambient temperature)|
|Cooling Methods||Liquid Cooled|
|Choke/Primer/Glow Plug||Glow Plug|
|Track Drive||1.33 cubic inch per rev., Dedicated 19.6 GPM @ 3,000 PSI|
|Attachment Pump||.66 cubic inch per rev., Dedicated 15 GPM @ 3,000 PSI|
|Attachment Valve||4 section, (2 float, 2 standard)|
|Track Motors||125cc or 7.67 cubic per rev. (2)|
|Primary Drive Chain||60R, 9,200 lb tensile strength|
|Final Drive Chain||80HK, 22,046 lb tensile strength|
|Chain Sprockets||Induction hardened steel|
|Drawbar Pull||3,000 lbs.|
|Type||TCP – Tandem Chain Path (Dual chains each track)|
|Ground Contact||48″ long x 9 1/2″ wide / 5.36 sq. ft.|
|Chain Type||CA551X – 30,000 tensile strength|
|Number of Track Pads||72 total, 36 per side|
|Tensioning Type||Industrial grade coiled steel springs (4)|
|Pad Thickness||1/4″ thick steel|
|Pad Size||3” wide x 9 1/2” long|
|Shoe Types||Optional: Non-Marking UHMW Shoe, Steel grouser shoe|
|Track Sprockets||3/8″ AR200 pre-hardened steel, plasma cut|
|Track Rollers||4 1/2″ diameter, 5/8″ thick flanges, solid steel (5 per side)|
|Fuel Type||Diesel fuel No. 2-D (ASTM D975)|
|Fuel Capacity||5+ U.S. gallons, (19 liters)|
|Inline Fuel Filter||Yes|
|Fuel Shutoff Value||Yes, on engine|
|Dimensions & Weights|
|Lower Frame Ground Clearance||Front: 6.75″, Rear: 5.25″|
|Upper Frame Ground Clearance||9.5″|
|Length||62.5″ (With no attachments)|
|Height||52″ (Does not include stack height, With no ROPS)|
|ROPS Height||80 3/4″ (Includes grouser shoes)|
|Weight||2,200 lbs (With no attachments)|
|Speed||Variable Regular Drive: 0-3 mph|
|Frame||Lower: Robot welded, 1/4″ plate steel, 2″ bars / Upper: Robot welded, 1/4″ plate steel & 7GA|
|Axle Size||1 3/16” diameter on track Sprockets, 7/8″ diameter on idlers with protective axle covers|
|As Shipped||Assembled, painted (Loader, 6-Way Blade, Backhoe, Rear Hitch & PTO Assembled. Other attachments need assembly)|
|Shipping Dimensions||50″ x 90″ x 58″ High (Extra pallets with backhoe & other attachments, 50″ x 90″ x 88″ high if ROPS & grouser shoes factory installed)|
|Shipping Weight||2,430 lbs. (With attachments will vary)|
|Safety & Misc.|
|Brakes||Dual, 8” Disk Caliper|
|Headlights||Yes, (2) 18W LED|
|ROPS||Optional, 2 Pt. with overhead bend, Certified|
|Instrumentation||LOFA ignition with hour meter, battery & engine oil indicator lights,|
|Seat||Contractor Grade with Armrests, Forward/Reverse Glides & Rotatable & height settings with pin|
|Hydraulic Oil Cooler||Internally mounted, 9″ engine fan cooled, 363 CFM.|
|Electric Attachment Control||Standard, EAC™ Electric Attachment Control System|
|PTO||Optional, 1 3/8″ dia., 6 splined, 540 RPM, output: approx. 20 hp|
|Machine Warranty||2 yrs Residential/Commercial Use|
|Engine Warranty||3 yrs MCW – Major Component Warranty|
|Battery System / CCA||12V / 750 CCA, Complimentary basis|
- MH8500 Brochure
- MH4900 & MH8500 Parts Price List
- MH8500 Buyer’s Guide
- Magnatrac – Intro Brochure [61.449 MB]
- Magnatrac Warranty [344.21 KB]
- MH8500 Operator – Technical Manual
- MH8500 Part Photo Manual
- Kubota D1305 Engine Operator Manual [2.73 MB]
- Kubota D1305 Engine Workshop Manual [8.6 MB]
- MH8500 Operator/Technical Manual 6.20 [7.7 MB]
|A.||It would use the standard size, but with the smaller flow rates. Please give us a call if you have additional questions. > 1-877-828-8323.|
|Posted by: Tyler|
|A.||It depends on the weight of the hay bales. The HL900 Loader that connects to the MH4900 or the MH8500, can lift approx. 2,000 lbs off the ground and then approx. 800 lbs at full lift height of 93" high.|
|Posted by: Shane|
|A.||The Mh85000 currently puts out approx. 20 hp at the PTO. We use the standard 1 3/8" six-splined shaft. This is a hydraulic driven PTO.|
|Posted by: Gerald|
|A.||It's made right here in the USA, at our factory in Cedarburg, WI! - Find out more about us by clicking this link.|
|Posted by: Ron|
|A.||Great question! We actually sell factory direct to you and have no dealers. Please see additional information below regarding shipments to other countries. Deliveries to Other Countries Outside the USA & Canada All customers outside the US and Canada must find a freight forwarder to handle the shipping, crating, and any other duties, taxes or other fees. The freight forwarders only deliver to a business address. If you do not have a business address they can deliver to the countries closest port and then you can pick up the unit at the port or make other arrangements for the items to be directly delivered to you. Merchandise is payable directly to the Struck Corporation by wire transfer or PayPal. A 30% deposit is required to put an order into our production schedule with the remaining balance due right before we ship.|
|Posted by: BOUDEVILLE|
|A.||Yes, we do have "True Dozer Power" built into all of our machines, but please keep in mind our machines are lighter than large full scale dozers, so you will have to take smaller bites. The larger MH series MAGNATRACS offer a true 6-way blade like a real dozer and come with the float action as well, so you can float your blade or bucket when reversing, to level the ground. On the smaller machines, like the RS1000 or the kit dozer, there is a manual angle (left and right motion) available and it does have a replaceable cutting edge than can be angled slightly (tilted), but is not considered a "True 6-way blade".|
|Posted by: Stanley|
|A.||Yes, you can! The loader on the MAGNATRAC MH8500 or the MAGNATRAC MH4900 are not just loaders, they can excavate as well. Building terraces with these machines will work, however, there are probably a few different ways to go about the project. If you'd want a backhoe on the back of the machine to aide in the project, you can add that as well. You could buy a backhoe at a later date as well and add it to the machine.|
|Posted by: Jose|
|A.||A MAGNATRAC or MINI-DOZER has a very low center of gravity and great traction, so in general terms they can do much better than a wheeled tractor. Read more about the benefits of a MAGNATRAC here. As far as a published slope and degree angle, we don't publish anything more than what we feel is safe. The number that we provide is 30% maximum grade-ability.|
|Posted by: K|
|A.||Yes, the Struck Corporation offers financing through Rocket Loans or we do accept PayPal Credit. If you are looking for longer terms that what is offered under our financing page, we have found that you can get better loan terms by dealing with local loan officers where they have already established a good credit history. We do accept Visa, Master Card, Discover card and PayPal Credit.|
Third Party Attachments
Many other companies make “farm type” implements and skid steer attachments that make the MAGNATRAC® MH8500 even more versatile. Please speak with a Struck Representative to verify specs on specific third party attachments will be compatible with our equipment. (GPM) Gallons Per Minute Ratings and weight specs will vary for each attachment. The MH8500 outputs 15 GPM @ 3,000 PSI for skid steer rated attachments with the standard universal skid steer mounting plate.
Shown in the picture is a hydraulic concrete breaker. Products to fit our SH44 – Speed Hitch Universal Mounting System
3rd party attachment links are shown below. Not all items listed on these websites will work with our machines. Call for additional details.
Shown in the picture is a PTO powered brush cutter. Products to fit our RH65 – Category 1 Three Point Rear Hitch
3rd party attachment links are shown below. Not all items listed on these websites will work with our machines. Call for additional details.
We offer a variety of easy shipping and delivery options within the United States and Canada. From home delivery to terminal delivery and everything in-between, we have you covered.
We ship to thousands of trucking terminals across the USA & Canada. While requesting a quote submit your zip code/postal code and we will find the trucking terminal closest to your location. When picking up at shipping terminal, you will need a trailer to accommodate your machine. The shipping terminal will load your machine into the back of a customer supplied trailer. Some customers hire a local flatbed towing service for larger deliveries to their home.
The business you select must have a semi height loading dock or forklift to unload and accept delivery during normal business hours. You must make arrangements with the business to accept your delivery. Business locations could include: work places, feed stores, lumber yards, building supply centers, etc.
Your home must be accessible by tractor-trailer*, and someone must be home to accept delivery. The truck driver will lower your item to the ground using a forklift attached to the back of a flatbed tractor-trailer. The driver will move the item to the ground with the forklift. The driver can only move the item off the truck, not to a specified location.
All customers outside the US and Canada must find a freight forwarder to handle the shipping, crating, and any other duties, taxes or other fees. The freight forwarders only deliver to a business address. If you do not have a business address they can deliver to the countries closest port and then you can pick up the unit at the port or make other arrangements for the items to be directly delivered to you. Merchandise is payable directly to the Struck Corporation by wire transfer or PayPal. A 50% deposit is required to put an order into our production schedule with the remaining balance due right before we ship.
Rush delivery is not available on freight shipments. We ship best method, depending on the delivery method you choose and your location.
For Home Delivery Services, after we process your order and it leaves our factory, the freight company will call you to schedule a delivery time. The carrier will usually provide a 3-4 hour delivery window (for example, 8 am to noon).
If the package arrives damaged, you must note it on the bill of lading. If your machine arrives damaged, call Struck customer service at 1-877-828-8323 as soon as possible.
You can also pick up your machine at the Struck factory in Cedarburg, WI. When an item is picked up at the factory, we charge a 5.6% sales tax unless you have a tax exempt identification.
*Home delivery is not available in all areas. For delivery to Canada, you must have a freight broker. If you do not have a freight broker that you normally work with, our shipping company does have a broker that you can use. Prices for shipments to Canada do not include any duties, taxes or other fees related to the shipment. Speak with a freight broker for more information. All prices are in US Funds. A driveway is considered accessible to a tractor trailer if it a) has no overhanging trees, b) has no power lines, c) contains no culverts or bridges, and d) will allow the truck to make a full turn-around. If the driveway isn’t accessible the delivery will be made at the base of the driveway.
Parts orders placed by 3 pm CST are shipped the same day by UPS or Priority Mail. Any out of stock items ship within 1 week. All orders are currently by phone, please call 1-877-828-8323 Monday – Friday from 8 am until 5 pm Central Standard Time (CST). Visa, Master Card, Discover, American Express and Pay Pal accepted. In the future an online shopping cart will be offered.