The Best Fit for Most Homeowners
The MAGNATRAC® RS1000 (shown on the right in the picture) is the perfect balance of size, price and versatility for homeowners, small hobby farms and for those that just want to “Have Fun” on their property. With a manual front hitch package: you’ll be able to grade driveways, plow snow, pull logs, make a small garden and pull 3rd party attachments. A hydraulic attachment package, using a hydraulic front hitch or hydraulic loader, opens up a whole world of possibilities: landscape your yard, make ATV and hiking trails, dig a small fish pond, make food plots and more.
Options include hydraulic or manual attachments. Rubber or steel bolt on track shoe, loader, grapple, bucket, forks, angling blade, box scraper, draw-bar, log crane, winches, 2 in. receiver hitch, sleeve hitch, rippers, rake, backhoe, rock/debris thumb, stone boat, mud scrapers and many more. With the use of our rear sleeve hitch system you can pull other third party attachments like mowers, wagons, cargo carriers, trailers, boats etc.
With the Honda GX390, you’re looking at one of the best engines in the business. More power. Quieter performance. Lower fuel consumption. Lower emissions. Better features. Exceptional performance. Honda’s GX series lives up to the legend.
This consistent and precise trademarked track design, has 7x greater sprocket support compared to a single sprocket design. The drive behind the MAGNATRAC® TCP™ system is the matched sprockets of the rear drive and front idler sprocket. Simultaneously engaging both track chains, provides redundancy in case of debris interference.
The MAGNATRAC® turns 360 degrees in half the space. Because you can rotate the tracks in opposite directions at the same time, the RS1000 turns in it’s own length. The RS1000 turns in just over 5 ft. A comparably powered compact tractor requires more than twice the space – over 10 ft. of clear space to turn around. Instant power to forward and reverse, means no shifting gears to mess with. Honda ignition allows for reliable starts coupled with a low engine oil sensor adds another layer of engine protection.
Perfect for keeping on board tools, log towing chains or other supplies, this easily accessible 11 1/2 in. x 7 3/4 in. tool box provides great storage. A 6 in. x 4 1/4 in. hole opening assures easy access while making sure your tools stay secure.
Two powerful halogen headlights make sure your work or fun doesn’t stop just because the sun goes down! Extends your viewing distance with 12V, 55 Watt H3 halogen bulbs. The simulated H.I.D. white beam provides a super bright light that enhances visibility.
Deluxe operator’s seat with left and right arm rests provides comfort while on the job. Modular seat design allows for an easy seat adjustment while your cup holder allows to keep your water (or other refreshment) within an easy arms reach.
Sturdy hood grab bar gives you a helping hand when getting on and off your RS1000. The decorative stack provides the authentic bulldozer look and independent track drive handles, provide easy control of instant forward and reverse with no shifting gears.
|Starting Type||Electric, at seat (Back up recoil)|
|Torque||19.5 lb-ft (net) (26.4 Nm) @ 2,500 rpm|
|Engine Type||Air-cooled 4-stroke Honda OHV|
|Number of Cylinders||1 (Cast-Iron Sleeved)|
|Carb & EPA Certified||Yes|
|Low Oil Alert||Yes|
|Oil Capacity||1.16 US qt (1.1 L)|
|Oil Type||SAE 10W-30|
|Cooling Methods||Air Cooled|
|Main Drive||#40 Lubrication-Free Roller Chain|
|Track Clutch||2 Forward, 1 Reverse (Each side)|
|Track Clutch Type||Kevlar, Power-Rated Belts, Resist high temps & shock loads|
|Primary Drive||Induction Hardened Steel Sprocket Shafts|
|Final Drive||#50H Roller Chain|
|Drawbar Pull||1,500 lbs.|
|Type||TCP – Tandem Chain Path (Dual chains each track)|
|Chain Type||CA557 – 33,000 tensile strength|
|Number of Track Pads||58 total, 29 per side|
|Tensioning Type||Mechanical, Urethane tension springs|
|Pad Thickness||1/4″ thick steel|
|Pad Size||2 ¾” wide x 8” long|
|Shoe Types||Optional: Rubber pad, Steel grouser shoe, Steel grouser plate|
|Track Sprockets||AR200 pre-hardened steel, plasma cut|
|Fuel Type||Unleaded 86 octane or higher|
|Fuel Capacity||6.4 U.S. qts, approx. 1.6 gallons, (6.1 liters)|
|Inline Fuel Filter||Yes|
|Fuel Shutoff Value||Yes|
|Dimensions & Weights|
|Length||51.5″ (With no attachments)|
|Height||38″ (With no ROPS)|
|ROPS Height||80 3/4″ (Includes grouser shoes)|
|Weight||700 lbs (With no attachments)|
|Body Frame||12 Gauge|
|Axle Size||1 3/16” Diameter|
|As Shipped||Assembled, painted (Some attachments need assembly)|
|Shipping Dimensions||50″ x 90″ x 48″ High (Possible extra skids, higher if ROPS)|
|Shipping Weight||1,069 lbs. (With attachments will vary)|
|Safety & Misc.|
|Brakes||Dual, 8” Caliper|
|ROPS||Optional, 2 Pt. with overhead bend, Certified|
|Instrumentation||Optional Hour/Tach Meter|
|Seat||Low back, adjustable (Rotatable & height adjustment with backhoe)|
|Machine Warranty||2 yrs Residential Use|
|Engine Warranty||3 yrs Residential Use, 3 yr Commercial use|
|Kevlar Belts||90 days|
|Battery||295CCA, Complimentary basis|
- HONDA- GX270-GX390-OWNERS ENGINE MANUAL 00X37Z5K6110 [7.62 MB]
- Magnatrac Warranty [344.21 KB]
- RS1000 Attachment Manual 6.25.14 – Part 1 [19.94 MB]
- RS1000 Attachment Manual 6.25.14 – Part 2 [7.967 MB]
- RS1000 Brochure [29.05 MB]
- RS1000 Buyer’s Guide [51.21 MB]
- RS1000 Operator-Technical Manual 2008 [34.86 MB]
- RS1000 Operator-Technical Manual 2012 [22.05 MB]
- RS1000 Parts Price List [53 KB]
- RS1000 Price List [68.18 KB]
|A.||Thank you for reaching out on this RS1000 package. You will rec. a quote shortly via the email address you provided.|
|Posted by: Thai|
|A.||Great question! It's going to vary, as many variables can affect fuel consumption: such as throttle setting, soil conditions, etc. but in general, I would say approx. 6-8 hours on a single tank is a good estimate.|
|A.||Great question! Our RH65 - Category 1 Three Point Hitch that we offer for the larger models cannot be put on a RS1000. It is only offered for our larger MH series MAGNATRACS like the MH4900 or the MH8000. We do however offer a MRH35 - Manual Rear Hitch or HRH35 - Hydraulic Rear Hitch for the RS1000. This gives you the ability to use many other of our attachments and "garden type" ones as well. Please see the links to those attachments in the "Third Party Attachment" tab below.|
|Posted by: Kenneth|
|A.||Great question. Yes, you can add a backhoe to the RS1000, however, you can only add it to a RS1000 with a hydraulic front hitch or loader in the front. Reason being, is that the backhoe uses the same PP35 Power Pack to power the backhoe.|
|Posted by: carter|
|A.||Yes, you sure can. That being said, you will want to add it to a RS1000 that has a hydro power pack on it already, as that is a factory installed option. The power pack would be listed as a PP35 Power Pack on our price list, quotes or invoices.|
|A.||Yes, the Struck Corporation offers financing through PayPal credit. If you are looking for longer terms that what is offered under our financing page, we have found that you can get better loan terms by dealing with local loan officers where they have already established a good credit history. We do accept Visa, Master Card, Discover card and PayPal.|
Add Even More Versatility
Many other companies make “garden type” implements/attachments that make the MAGNATRAC® RS1000 even more versatile. Please speak with a Struck Representative to verify specs on specific third party attachments will be compatible with our equipment.
We offer a variety of easy shipping and delivery options within the United States and Canada. From home delivery to terminal delivery and everything in-between, we have you covered.
We ship to thousands of trucking terminals across the USA & Canada. While requesting a quote submit your zip code/postal code and we will find the trucking terminal closest to your location. When picking up at shipping terminal, you will need a trailer to accommodate your machine. The shipping terminal will load your machine into the back of a customer supplied trailer. Some customers hire a local flatbed towing service for larger deliveries to their home.
The business you select must have a semi height loading dock or forklift to unload and accept delivery during normal business hours. You must make arrangements with the business to accept your delivery. Business locations could include: work places, feed stores, lumber yards, building supply centers, etc.
Your home must be accessible by tractor-trailer*, and someone must be home to accept delivery. The truck driver will lower your item to the ground using a lowering platform on the back of the freight truck. All truck have pallet jacks to move the item off the platform. The driver can only move the item off the truck, not to a specified location.
Your home must be accessible by tractor-trailer*, and someone must be home to accept delivery. The truck driver will lower your item to the ground using a forklift attached to the back of a flatbed tractor-trailer. The driver will move the item to the ground with the forklift. The driver can only move the item off the truck, not to a specified location.
All customers outside the US and Canada must find a freight forwarder to handle the shipping, crating, and any other duties, taxes or other fees. The freight forwarders only deliver to a business address. If you do not have a business address they can deliver to the countries closest port and then you can pick up the unit at the port or make other arrangements for the items to be directly delivered to you. Merchandise is payable directly to the Struck Corporation by wire transfer or PayPal. A 30% deposit is required to put an order into our production schedule with the remaining balance due right before we ship.
Rush delivery is not available on freight shipments. We ship best method, depending on the delivery method you choose and your location.
For Home Delivery Services, after we process your order and it leaves our factory, the freight company will call you to schedule a delivery time. The carrier will usually provide a 3-4 hour delivery window (for example, 8 am to noon).
If the package arrives damaged, you must note it on the bill of lading. If your machine arrives damaged, call Struck customer service at 1-877-828-8323 as soon as possible.
You can also pick up your machine at the Struck factory in Cedarburg, WI. When an item is picked up at the factory, we charge a 5.6% sales tax unless you have a tax exempt identification.
*Home delivery is not available in all areas. For delivery to Canada, you must have a freight broker. If you do not have a freight broker that you normally work with, our shipping company does have a broker that you can use. Prices for shipments to Canada do not include any duties, taxes or other fees related to the shipment. Speak with a freight broker for more information. All prices are in US Funds. A driveway is considered accessible to a tractor trailer if it a) has no overhanging trees, b) has no power lines, c) contains no culverts or bridges, and d) will allow the truck to make a full turn-around. If the driveway isn’t accessible the delivery will be made at the base of the driveway.
Parts orders placed by 3 pm CST are shipped the same day by UPS or Priority Mail. Any out of stock items ship within 1 week. All orders are currently by phone, please call 1-877-828-8323 Monday – Friday from 8 am until 5 pm Central Standard Time (CST). Visa, Master Card, Discover, American Express and Pay Pal accepted. In the future an online shopping cart will be offered.