Features

Honda Engine Reliability
With the Honda GX390, you’re looking at one of the best engines in the business. More power. Quieter performance. Lower fuel consumption. Lower emissions. Better features. Exceptional performance. Honda’s GX series lives up to the legend.

Robtically Welded Track System with TCP™ Technology
This consistent and precise trademarked steel track design, has 7x greater sprocket support compared to a single sprocket design. The drive behind the MAGNATRAC® TCP™ system is the matched sprockets of the rear drive and front idler sprocket. Simultaneously engaging both track chains, provides redundancy in case of debris interference.

NEW Rubber Track Option
That’s right! Travel on any surface! – Rocky terrain, gravel, nice lawns, concrete, blacktop, etc. Will not scratch driveways or garage floors! These are “Contractor Grade” rubber tracks that will give you the Power & Traction you’re looking for in a MAGNATRAC®, but with the “Velvet Touch” of Rubber! – See RTU19 – Rubber Track System Upgrade. After market rubber track kits available for older RS1000s.

Zero Turn Technology, No Shifting Gears and Honda Ignition
The MAGNATRAC® turns 360 degrees in half the space. Because you can rotate the tracks in opposite directions at the same time, the RS1000 turns in it’s own length. The RS1000 turns in just over 5 ft. A comparably powered compact tractor requires more than twice the space – over 10 ft. of clear space to turn around. Instant power to forward and reverse, means no shifting gears to mess with. Honda ignition allows for reliable starts coupled with a low engine oil sensor adds another layer of engine protection.

Easily Accessible Tool Box
Perfect for keeping on board tools, log towing chains or other supplies, this easily accessible 11 1/2 in. x 7 3/4 in. tool box provides great storage. A 6 in. x 4 1/4 in. hole opening assures easy access while making sure your tools stay secure.

Dual LED Headlights
Two powerful LED headlights make sure your work or fun doesn’t stop just because the sun goes down! Extends your viewing distance with 12V, 18 Watt LED bulbs. They provide a super bright light that enhances visibility.

Arm Rests, Adjustable Seat & Drink Holder
Deluxe operator’s seat with left and right arm rests provides comfort while on the job. Modular seat design allows for an easy seat adjustment while your cup holder allows to keep your water (or other refreshment) within an easy arms reach.

Hood Grab Bar, Decorative Stack & Easy Drive Controls
Sturdy hood grab bar gives you a helping hand when getting on and off your RS1000. The decorative stack provides the authentic bulldozer look and independent track drive handles, provide easy control of instant forward and reverse with no shifting gears.

Specs

Manuals

Attachments

Build & Price the RS1000

AM39 – Angle Mount Kit

B612 – 12 in. Bucket Kit

B616 – 16 in. Bucket Kit

BB60 – Ballast Box Kit

BD23 – Drawbar Kit

BD7 – Blade Drawbar Kit

BF22 – Bucket Fork Kit

BK44 – Bucket Kit (Trip Handle Dump)

BK45 – Bucket Kit (Hydraulic Dump)

BM13 – Bucket Mouth Kit

BR50 – Frost / Chisel Tooth Ripper Kit

BS40 – Box Scraper Kit

D1060 – Backhoe Kit

D1060UG – Backhoe Kit

DB44 – Dozer Blade Kit

DR30 – Dual Ripper Kit

EW20 – Electric Winch Kit

FA-RS58 – Factory Assembly of the RS58 Rubber Shoe Kit

FA-TSO58 – Factory Assembly of the TSO58 Grouser Shoe Kit

FW15 – Front Weight Kit

HA14 – Hitch Adapter Kit

HE47 – Hitch Extender Kit

HFH15 – Hydraulic Front Hitch Kit

HM10 – Hour Meter Kit

HRH35 – Hydraulic Rear Hitch Kit

LCA9 – Log Crane Adapter / Drawbar Kit

LW16 – Manual Winch Kit

LW228 – Log Crane Kit

MFH15 – Manual Front Hitch Kit

MRH35 – Manual Rear Hitch Kit

MS90 – Mud/Ice Scraper Kit

PP35 – Hydro Power Pack Kit

RK26 – Rake Kit

ROPS20 – Roll Over Protection Structure Kit

RS58 – Rubber Shoe Kit

RT24 – Rock/Debris Thumb Kit

SB18 – Stone Boat Kit

SB60 – Snow Blade Kit

TM96 – Track Mat Kit

TR23 – Triple Shank Ripper Kit

TSO58 – Grouser Shoe Kit

RTU19 – Rubber Track Upgrade

See More Attachments

Show less

FAQ

Third Party Attachments

Add Even More Versatility

Many other companies make “garden type” implements/attachments that make the MAGNATRAC® RS1000 even more versatile. Please speak with a Struck Representative to verify specs on specific third party attachments will be compatible with our equipment. Moldboard plow shown in the picture.

Products to fit the MRH35 – Manual Rear Sleeve Hitch or the HRH35 – Hydraulic Rear Sleeve Hitch

Brinly.com
Agri-Fab.com
SwisherInc.com

Shipping

We offer a variety of easy shipping and delivery options within the United States and Canada. From home delivery to terminal delivery and everything in-between, we have you covered.

Shipping Terminal (USA & Canada)
We ship to thousands of trucking terminals across the USA & Canada. While requesting a quote submit your zip code/postal code and we will find the trucking terminal closest to your location. When picking up at shipping terminal, you will need a trailer to accommodate your machine. The shipping terminal will load your machine into the back of a customer supplied trailer. Some customers hire a local flatbed towing service for larger deliveries to their home.

Business Delivery (USA & Canada)
The business you select must have a semi height loading dock or forklift to unload and accept delivery during normal business hours. You must make arrangements with the business to accept your delivery. Business locations could include: work places, feed stores, lumber yards, building supply centers, etc.

Home Delivery with Lift-Gate Service (USA & Canada)
Your home must be accessible by tractor-trailer*, and someone must be home to accept delivery. The truck driver will lower your item to the ground using a lowering platform on the back of the freight truck. All truck have pallet jacks to move the item off the platform. The driver can only move the item off the truck, not to a specified location.

Home Delivery with Flatbed & Forklift Service (USA & Canada)
Your home must be accessible by tractor-trailer*, and someone must be home to accept delivery. The truck driver will lower your item to the ground using a forklift attached to the back of a flatbed tractor-trailer. The driver will move the item to the ground with the forklift. The driver can only move the item off the truck, not to a specified location.

Deliveries to Other Countries Outside the USA & Canada
All customers outside the US and Canada must find a freight forwarder to handle the shipping, crating, and any other duties, taxes or other fees. The freight forwarders only deliver to a business address. If you do not have a business address they can deliver to the countries closest port and then you can pick up the unit at the port or make other arrangements for the items to be directly delivered to you. Merchandise is payable directly to the Struck Corporation by wire transfer or PayPal. A 30% deposit is required to put an order into our production schedule with the remaining balance due right before we ship.

Please Note:

Rush delivery is not available on freight shipments. We ship best method, depending on the delivery method you choose and your location.

For Home Delivery Services, after we process your order and it leaves our factory, the freight company will call you to schedule a delivery time. The carrier will usually provide a 3-4 hour delivery window (for example, 8 am to noon).

If the package arrives damaged, you must note it on the bill of lading. If your machine arrives damaged, call Struck customer service at 1-877-828-8323 as soon as possible.

You can also pick up your machine at the Struck factory in Cedarburg, WI. When an item is picked up at the factory, we charge a 5.6% sales tax unless you have a tax exempt identification.

*Home delivery is not available in all areas. For delivery to Canada, you must have a freight broker. If you do not have a freight broker that you normally work with, our shipping company does have a broker that you can use. Prices for shipments to Canada do not include any duties, taxes or other fees related to the shipment. Speak with a freight broker for more information. All prices are in US Funds. A driveway is considered accessible to a tractor trailer if it a) has no overhanging trees, b) has no power lines, c) contains no culverts or bridges, and d) will allow the truck to make a full turn-around. If the driveway isn’t accessible the delivery will be made at the base of the driveway.

Parts