1. Hydraulic Loader
Lift up to 800 pounds as high as 93” with the HL900 loader. The hydraulic attachment gives you full curl/dump, lift and down functions that are easily controlled with gentle finger pressure. Plus, there’s a safety lock to keep the loader arms elevated during maintenance.
2. Speed Hitch Kit
Looking for a way to attach your third-party attachment (such as an auger, trencher, tiller, or snow blower) to your MAGNATRAC? The SH44 speed hitch is just what you’ve been looking for.
3. Brush Grapple
Four solid steel tines provide up to 1,000 pounds of clamping force, for heavy jobs like moving trees or lifting away large chunks of cement. Plus, the BG48 brush grapple kit is fully retractable, so that you can use your front bucket without having to remove the attachment.
4. Backhoe
Dig up to eight feet deep with a 164-degree swing. Your D108 backhoe attachment can help you clean out a trench, reach into a ravine, or finally lay that water line you’ve been meaning to put out.
5. Six Way Blade
Fully assumed and ready to install, the 54” wide SWB54 six-way blade features a heat treated cutting edge that can be rotated 25-degrees either direction, with a 9-degree tilt (up or down.) It mounts directly to your track frame and the blades are removable if you ever need to change them out.
6. Rear Hitch with Power Take Off Kit
With enough power for a 1,000-pound lift, the RH65 rear hitch attachment gives you an entirely hydraulic, three-point “lift, float, and down pressure” control that’s easily controlled with the touch of a finger. Don’t forget to pair it with the PTO70 power take off, which allows a rear hitch cavity mount.
7. Shank Ripper
When you’re shattering hard, dry, or compacted soil, the S14 5-tooth ripper gives you the power you need to get the job done. Each of the teeth are interchangeable for your project preferences.
8. Hydraulic Auger
Have some post holes that you need to dig? Building a pole barn? The NH3A remote auger drive assembly can mount straight to your load bucket or in place of your backhoe bucket, with both your loader and backhoe remaining in place.
9. Roll Over Protection
Are you using a MAGNATRAC for your small personal business? Your Struck machine has a low center of gravity, but federal law states that an employee can’t operate any tractor without a protective roll-over structure. The ROP85 kit features a 2-point overhead design, which also includes a seat belt.
10. Grouser Shoes
Need extra traction for that inclined surface, or muddy project on the back 40? The TSO40 grouser shoe kit is a replaceable, channel-shaped steel add-on that gives you get the grip you need, so that you don’t waste a lot of time. They go right over your existing track system.
